Why are there different ways of calculating your Total Cholesterol?
Q. My sister says your total cholesterol should be your HDL + LDL. However, on my last blood test, my HDL + LDL was 10 points lower than my total cholesterol. So, I found some web sites that have the following formula: HDL + LDL + (Triglyceride * 20%) = Total Cholesterol The formula above does work to give me my total cholesterol given the other #'s (HDL, LDL, and Triglycerides) on my last blood test results. But, I want to know why my sister's always come back as: HDL + LDL = Total Cholesterol Some web sites say to calculate it one way and others say the other way. Anyone know why they would be different?
Asked by Sugar_Mama - Fri Dec 15 20:16:21 2006 - - 2 Answers - 0 Comments
A. Technically, there is no pure cholesterol in your bloodstream. Cholesterol is transported by lipoproteins. LDL (low-density lipoproteins) and HDL (high-density lipoprotiens) are the lipoprotiens used to transport cholesterol. Tests can be run that actually test for the cholesterol, which gives you the total cholesterol number (direct measurement). Or you can run a test for the HDL and LDL cholesterol complexes. You add these values to get a computed total cholesterol. If you run a total cholesterol AND compute it from summing the HDL and LDL cholesterols they should be close, but won't agree exactly. Tests have a margin of error. This is why they won't match exactly. Though triglyerides are often transported by lipoproteins, I don't… [cont.]
Answered by Radagast97 - Fri Dec 15 20:35:01 2006
Q. My sister says your total cholesterol should be your HDL + LDL. However, on my last blood test, my HDL + LDL was 10 points lower than my total cholesterol. So, I found some web sites that have the following formula: HDL + LDL + (Triglyceride * 20%) = Total Cholesterol The formula above does work to give me my total cholesterol given the other #'s (HDL, LDL, and Triglycerides) on my last blood test results. But, I want to know why my sister's always come back as: HDL + LDL = Total Cholesterol Some web sites say to calculate it one way and others say the other way. Anyone know why they would be different?
Asked by Sugar_Mama - Fri Dec 15 20:16:21 2006 - - 2 Answers - 0 Comments
A. Technically, there is no pure cholesterol in your bloodstream. Cholesterol is transported by lipoproteins. LDL (low-density lipoproteins) and HDL (high-density lipoprotiens) are the lipoprotiens used to transport cholesterol. Tests can be run that actually test for the cholesterol, which gives you the total cholesterol number (direct measurement). Or you can run a test for the HDL and LDL cholesterol complexes. You add these values to get a computed total cholesterol. If you run a total cholesterol AND compute it from summing the HDL and LDL cholesterols they should be close, but won't agree exactly. Tests have a margin of error. This is why they won't match exactly. Though triglyerides are often transported by lipoproteins, I don't… [cont.]
Answered by Radagast97 - Fri Dec 15 20:35:01 2006
What was the total distance of his destination?
Q. Going to Austin, Bill caught a ride for two-third of the total distance with a friend. He then took a bus for one-fourth of the total distance. He walked the remaining 10 miles to arrive at his destination.
Asked by YouHelpMe-IHelpYou - Tue Mar 17 12:53:00 2009 - - 2 Answers - 0 Comments
A. 2/3 with friend 1/4 on bus 10 miles walking 2/3 + 1/4 = (8 + 3)/12 = 11/12 1 - 11/12 = 1/12 1/12 = 10 miles 2/3 = 8/12 = 8 x 10 = 80 miles 1/4 = 3/12 = 3 x 10 = 30 miles 10 + 80 + 30 = 120 miles.
Answered by ctot - Tue Mar 17 12:57:51 2009
Q. Going to Austin, Bill caught a ride for two-third of the total distance with a friend. He then took a bus for one-fourth of the total distance. He walked the remaining 10 miles to arrive at his destination.
Asked by YouHelpMe-IHelpYou - Tue Mar 17 12:53:00 2009 - - 2 Answers - 0 Comments
A. 2/3 with friend 1/4 on bus 10 miles walking 2/3 + 1/4 = (8 + 3)/12 = 11/12 1 - 11/12 = 1/12 1/12 = 10 miles 2/3 = 8/12 = 8 x 10 = 80 miles 1/4 = 3/12 = 3 x 10 = 30 miles 10 + 80 + 30 = 120 miles.
Answered by ctot - Tue Mar 17 12:57:51 2009
How do I adjust the subtotal and total amounts in Quickbooks Pro?
Q. The subtotal box on my quickbooks pro invoice shows the tax already calculated. Then the "total" box shows this same amount. How do I change my invoice template so that the subtotal shows the total without the tax already calculated and then the total shows the total of the order with the sales tax? Thanks. I can get to the point where I can edit the invoice but can't figure out how to setup the sales tax correctly.
Asked by rugthug - Wed May 27 11:54:56 2009 - - 1 Answers - 0 Comments
A. Go to LISTS--TEMPLATES..chooses template to change. Choose additional custimization..Footer tab and choose Footers you want (ie. subtotal, sales tax, total or balance due.) Hope this helps. I am working on 2007 version. Sometimes only the Admin has editing right to templates. You have to set up the sales tax in the item list. Depending on the state you are in, you may have to set up discresionary on top of a flat rate. You will have to do the base/flat rate and the discresionary seperately and then do a new group for them to be linked together.
Answered by KELLEY D - Wed May 27 12:08:35 2009
Q. The subtotal box on my quickbooks pro invoice shows the tax already calculated. Then the "total" box shows this same amount. How do I change my invoice template so that the subtotal shows the total without the tax already calculated and then the total shows the total of the order with the sales tax? Thanks. I can get to the point where I can edit the invoice but can't figure out how to setup the sales tax correctly.
Asked by rugthug - Wed May 27 11:54:56 2009 - - 1 Answers - 0 Comments
A. Go to LISTS--TEMPLATES..chooses template to change. Choose additional custimization..Footer tab and choose Footers you want (ie. subtotal, sales tax, total or balance due.) Hope this helps. I am working on 2007 version. Sometimes only the Admin has editing right to templates. You have to set up the sales tax in the item list. Depending on the state you are in, you may have to set up discresionary on top of a flat rate. You will have to do the base/flat rate and the discresionary seperately and then do a new group for them to be linked together.
Answered by KELLEY D - Wed May 27 12:08:35 2009
What is the highest percentage of total state and federal taxes that someone could have to pay?
Q. For instance, let's say for someone who made $1,000,000.00 in one year. I know that the highest federal tax bracket is 35% of total income. It is the highest total state tax that I don't know. Please, tell me what the total % of income tax would be.
Asked by Jaguar - Wed Oct 28 07:45:25 2009 - - 3 Answers - 0 Comments
A. It depends on which state. It could be 0% or it could be around 10%.
Answered by Wayne Z - Wed Oct 28 07:55:58 2009
Q. For instance, let's say for someone who made $1,000,000.00 in one year. I know that the highest federal tax bracket is 35% of total income. It is the highest total state tax that I don't know. Please, tell me what the total % of income tax would be.
Asked by Jaguar - Wed Oct 28 07:45:25 2009 - - 3 Answers - 0 Comments
A. It depends on which state. It could be 0% or it could be around 10%.
Answered by Wayne Z - Wed Oct 28 07:55:58 2009
How do you determine total debt for for debt ratio?
Q. Im having trouble determining the total for the debt ratio of total debt divided by total assets. I need Wal-Marts total debt, but not sure what categories on the balance sheet are included. Do I add total current liabilities, long term debt, long term obligations under capital leases, deferred income taxes and other, minority interest? I just need to know what to add up to get the total debt for Wal-Mart 2008. Thank you!
Asked by Sarah R - Sun Mar 1 22:14:54 2009 - - 1 Answers - 0 Comments
A. There should be a line for total liabilities. Use that, not current liabilities
Answered by Jenna M - Sun Mar 1 22:19:34 2009
Q. Im having trouble determining the total for the debt ratio of total debt divided by total assets. I need Wal-Marts total debt, but not sure what categories on the balance sheet are included. Do I add total current liabilities, long term debt, long term obligations under capital leases, deferred income taxes and other, minority interest? I just need to know what to add up to get the total debt for Wal-Mart 2008. Thank you!
Asked by Sarah R - Sun Mar 1 22:14:54 2009 - - 1 Answers - 0 Comments
A. There should be a line for total liabilities. Use that, not current liabilities
Answered by Jenna M - Sun Mar 1 22:19:34 2009
The total earnings of an employee for a payroll period is referred to as?
Q. The total earnings of an employee for a payroll period is referred to as? A) take-home pay B) pay net of taxes C) net pay D) gross pay I need this for accounting class. If anyone could help i would appreciate it!
Asked by Daniel - Mon Dec 3 20:40:27 2007 - - 1 Answers - 0 Comments
A. d: gross pay
Answered by PacificHR S - Mon Dec 3 20:43:31 2007
Q. The total earnings of an employee for a payroll period is referred to as? A) take-home pay B) pay net of taxes C) net pay D) gross pay I need this for accounting class. If anyone could help i would appreciate it!
Asked by Daniel - Mon Dec 3 20:40:27 2007 - - 1 Answers - 0 Comments
A. d: gross pay
Answered by PacificHR S - Mon Dec 3 20:43:31 2007
How do I lower my total bilirubin level without the use of medication?
Q. I recently had a physical, and the results are that my liver panel is too high. According to the laboratory results, my total bilirubin is 1.3. My bilirubin level needs to be within "normal" limits because I am in the process of applying for a position in law enforcement. I have 15 days to get rechecked by a doctor and submit my paperwork. How would I get my bilirubin level down to normal limits without the use of over the counter medicines and prescription drugs? I prefer holistic methods, such as the use of total body cleanses. Would a liver cleanse work? Thanks to all who answer.
Asked by pingkitoe - Mon Sep 24 21:02:18 2007 - - 1 Answers - 0 Comments
A. dear friend I used olive oil to lower my bilirubin level. 1 spoonful olive oil every 6 hrs. Ofcourse you can get "milk thisle" extract which does the same effect.
Answered by sageclone - Tue Sep 25 03:26:40 2007
Q. I recently had a physical, and the results are that my liver panel is too high. According to the laboratory results, my total bilirubin is 1.3. My bilirubin level needs to be within "normal" limits because I am in the process of applying for a position in law enforcement. I have 15 days to get rechecked by a doctor and submit my paperwork. How would I get my bilirubin level down to normal limits without the use of over the counter medicines and prescription drugs? I prefer holistic methods, such as the use of total body cleanses. Would a liver cleanse work? Thanks to all who answer.
Asked by pingkitoe - Mon Sep 24 21:02:18 2007 - - 1 Answers - 0 Comments
A. dear friend I used olive oil to lower my bilirubin level. 1 spoonful olive oil every 6 hrs. Ofcourse you can get "milk thisle" extract which does the same effect.
Answered by sageclone - Tue Sep 25 03:26:40 2007
What is total vacuum measured in inches of mercury?
Q. What is the measurement of total vacuum, measured as inches of mercury? Does it get measured as negative psi ? So, how many inches of mercury is total vacuum?
Asked by mrblob197 - Sat May 30 05:29:15 2009 - - 1 Answers - 0 Comments
A. It is the absolute pressure. One inch of mercury = 0.491161 psi It is negative psi if you are thinking of gauge pressure which is zero at normal atmospheric conditions. The absolute pressure at normal atmospheric conditions is about 14.7 psi.
Answered by goober - Sat May 30 05:43:58 2009
Q. What is the measurement of total vacuum, measured as inches of mercury? Does it get measured as negative psi ? So, how many inches of mercury is total vacuum?
Asked by mrblob197 - Sat May 30 05:29:15 2009 - - 1 Answers - 0 Comments
A. It is the absolute pressure. One inch of mercury = 0.491161 psi It is negative psi if you are thinking of gauge pressure which is zero at normal atmospheric conditions. The absolute pressure at normal atmospheric conditions is about 14.7 psi.
Answered by goober - Sat May 30 05:43:58 2009
How does the cost of Total Basement Finishing compare to using traditional drywall?
Q. We are thinking of having Total Basement Finishing come out to give us an estimate, but if they are way more expensive than drywall I don't want to have to waste two hours. Please share any personal experiences from using Total Basement Finishing. Thanks!
Asked by Trevor - Fri Feb 12 21:41:31 2010 - - 1 Answers - 0 Comments
A. Trevor, just don't get one estimate. There are a lot of companies that finish basements. Get a lot of estimates. Fortunately, there are plenty of local basement contractors (who specialize in finishing them) seeking to give free estimates with no obligation, and taking advantage of this is the consumer-smart way to go about finding an accurate answer to your question. It's important that you get a local estimate and not rely on guesses found here on Yah, as a lot of factors really bear on the cost of such a project, including the following: The cost of material and labor greatly varies by location. If you negotiate well with the contractor and he buys the materials for you, you may try to have him pass the discounted cost of the… [cont.]
Answered by Mr.GoodDeeds - Fri Feb 12 23:15:54 2010
Q. We are thinking of having Total Basement Finishing come out to give us an estimate, but if they are way more expensive than drywall I don't want to have to waste two hours. Please share any personal experiences from using Total Basement Finishing. Thanks!
Asked by Trevor - Fri Feb 12 21:41:31 2010 - - 1 Answers - 0 Comments
A. Trevor, just don't get one estimate. There are a lot of companies that finish basements. Get a lot of estimates. Fortunately, there are plenty of local basement contractors (who specialize in finishing them) seeking to give free estimates with no obligation, and taking advantage of this is the consumer-smart way to go about finding an accurate answer to your question. It's important that you get a local estimate and not rely on guesses found here on Yah, as a lot of factors really bear on the cost of such a project, including the following: The cost of material and labor greatly varies by location. If you negotiate well with the contractor and he buys the materials for you, you may try to have him pass the discounted cost of the… [cont.]
Answered by Mr.GoodDeeds - Fri Feb 12 23:15:54 2010
How much total video was actually taken on the moon during the Apollo program?
Q. Total time of the raw footage is what I'd like to know.
Asked by Jimbacsi - Sun Aug 31 11:53:06 2008 - - 1 Answers - 0 Comments
A. I've never added them up in detail, but the live video downlinks amount to (in my ballpark estimate) about 25-30 hours. Consider also that most missions also shot 16mm film which naturally wasn't available until the film was returned and developed, which added up to an hour to each mission's surface cinematography time. Mark Gray's company, linked below, sells DVD transfers of the best surviving sources of the recorded downlinks and film.
Answered by Clavius - Sun Aug 31 12:18:38 2008
Q. Total time of the raw footage is what I'd like to know.
Asked by Jimbacsi - Sun Aug 31 11:53:06 2008 - - 1 Answers - 0 Comments
A. I've never added them up in detail, but the live video downlinks amount to (in my ballpark estimate) about 25-30 hours. Consider also that most missions also shot 16mm film which naturally wasn't available until the film was returned and developed, which added up to an hour to each mission's surface cinematography time. Mark Gray's company, linked below, sells DVD transfers of the best surviving sources of the recorded downlinks and film.
Answered by Clavius - Sun Aug 31 12:18:38 2008
What is the total number of knights moves on an mxn chessboard?
Q. What is the total number of knights moves on an mxn chessboard? I don't know how to find an algorithm for that and this is one of the problems in my homework. Any help would be appreciated-thanks! No; I know how to find a knight's tour. The question I posted is the exact replica of what my combinatorics teacher told us to find.
Asked by Gabriel D - Tue Mar 10 18:46:29 2009 - - 3 Answers - 2 Comments
A. On interpretation of the question would be: how many pairs of squares are separated by a knight's move ? In the middle of the board, a knight can move to up to eight squares, but on or even closer to the edges, it is less. At the end we divide by 2, since each pair would have been counted twice. Double numbers are: 2 3 4 4 4 4 3 2 = 26 3 4 6 6 6 6 4 3 = 38 4 6 8 8 8 8 6 4 = 52 4 6 8 8 8 8 6 4 = 52 and same thing upside down last 4 rows So double numbers on half the board will be the total. 2 * 4 [ corners ] 3 * 8 [ next to corners on edges ] 4 * 2 * (m - 4 + n - 4) [ middles of edges ] 4 * 4 [ corners of m-2 x n-2 region 6 * 2 * (m - 4 + n - 4) [ middles of rows one in from edge ] 8 * (m-4) * (n-4) [ interior squares have 8 moves ] … [cont.]
Answered by MathMan TG - Tue Mar 10 20:46:25 2009
Q. What is the total number of knights moves on an mxn chessboard? I don't know how to find an algorithm for that and this is one of the problems in my homework. Any help would be appreciated-thanks! No; I know how to find a knight's tour. The question I posted is the exact replica of what my combinatorics teacher told us to find.
Asked by Gabriel D - Tue Mar 10 18:46:29 2009 - - 3 Answers - 2 Comments
A. On interpretation of the question would be: how many pairs of squares are separated by a knight's move ? In the middle of the board, a knight can move to up to eight squares, but on or even closer to the edges, it is less. At the end we divide by 2, since each pair would have been counted twice. Double numbers are: 2 3 4 4 4 4 3 2 = 26 3 4 6 6 6 6 4 3 = 38 4 6 8 8 8 8 6 4 = 52 4 6 8 8 8 8 6 4 = 52 and same thing upside down last 4 rows So double numbers on half the board will be the total. 2 * 4 [ corners ] 3 * 8 [ next to corners on edges ] 4 * 2 * (m - 4 + n - 4) [ middles of edges ] 4 * 4 [ corners of m-2 x n-2 region 6 * 2 * (m - 4 + n - 4) [ middles of rows one in from edge ] 8 * (m-4) * (n-4) [ interior squares have 8 moves ] … [cont.]
Answered by MathMan TG - Tue Mar 10 20:46:25 2009
What is the total number of completely filled principal energy levels in an atom Argon in the ground state?
Q. Could you please explain to me how this kind of question is done. What is the total number of completely filled principal energy levels in an atom Argon in the ground state?
Asked by ashershow2 - Sun Oct 18 14:31:57 2009 - - 1 Answers - 0 Comments
A. What??
Answered by jzlsfjal - Sun Oct 18 14:50:30 2009
Q. Could you please explain to me how this kind of question is done. What is the total number of completely filled principal energy levels in an atom Argon in the ground state?
Asked by ashershow2 - Sun Oct 18 14:31:57 2009 - - 1 Answers - 0 Comments
A. What??
Answered by jzlsfjal - Sun Oct 18 14:50:30 2009
What is the total number of sporting events in the US every year?
Q. What is the total number of sporting events in the US every year? This includes professional, minor leagues, college, etc. Everything. Would be great to get high school broken out separately.
Asked by bunty815 - Sun Sep 3 18:15:32 2006 - - 1 Answers - 1 Comments
A. Too high to count. Well in the millions. You could count up the number of high school students and make some assumptions to get a closer estimate. If you use 17 million high school students, 10% participate in sports you're interested in. Average team size of 10 and 10 events per year give you 170 million! If you assume college is 20% high school and the rest 2%, you'll be somewhere in a big ballpark for an estimate. I'll guess 207.4 million. Let me know how close a guess that is when you have the final answer.
Answered by Nick - Tue Sep 5 11:11:18 2006
Q. What is the total number of sporting events in the US every year? This includes professional, minor leagues, college, etc. Everything. Would be great to get high school broken out separately.
Asked by bunty815 - Sun Sep 3 18:15:32 2006 - - 1 Answers - 1 Comments
A. Too high to count. Well in the millions. You could count up the number of high school students and make some assumptions to get a closer estimate. If you use 17 million high school students, 10% participate in sports you're interested in. Average team size of 10 and 10 events per year give you 170 million! If you assume college is 20% high school and the rest 2%, you'll be somewhere in a big ballpark for an estimate. I'll guess 207.4 million. Let me know how close a guess that is when you have the final answer.
Answered by Nick - Tue Sep 5 11:11:18 2006
What is the total charge of all the electrons in a 12kg bar of aluminum?
Q. What is the total charge of all the electrons in a 12 kg bar of aluminum? (Aluminum has 13 electrons per atom and an atomic mass of 27 u.) What is the net charge of the bar?
Asked by haniballektress - Fri Jan 25 23:45:24 2008 - - 1 Answers - 0 Comments
A. each atom has 13 electrons, and in 12,000 grams there are (12000* 6.023* 10^23)/ 27 electrons using mole concept. each electron has a charge of -1.6* 10^19 coulumbs then do the math and you get the charge as: -1157796825.96 coulumbs. however, net charge is zero as there is a +1157796825.96 charge due to the protons and the two cancel out.
Answered by chinu - Fri Jan 25 23:54:48 2008
Q. What is the total charge of all the electrons in a 12 kg bar of aluminum? (Aluminum has 13 electrons per atom and an atomic mass of 27 u.) What is the net charge of the bar?
Asked by haniballektress - Fri Jan 25 23:45:24 2008 - - 1 Answers - 0 Comments
A. each atom has 13 electrons, and in 12,000 grams there are (12000* 6.023* 10^23)/ 27 electrons using mole concept. each electron has a charge of -1.6* 10^19 coulumbs then do the math and you get the charge as: -1157796825.96 coulumbs. however, net charge is zero as there is a +1157796825.96 charge due to the protons and the two cancel out.
Answered by chinu - Fri Jan 25 23:54:48 2008
What is the total power dissipated in the circuit?
Q. Two resistors are connected in parallel across an ideal 12.0 V battery. Resistor A has a value of 22 ohm and resistor B carries a current of 0.5021 A. What is the total power dissipated in the circuit?
Asked by physics help - Tue Feb 17 10:03:15 2009 - - 2 Answers - 0 Comments
A. Peter H posted a good and correct solution. Below is another solution without needing the total current. Because both resistors are in parallel across the battery, then the entire battery voltage appears across each resistor. For resistor A, we know it has a voltage drop of 12v and a resistance of 22 . We have enough information to calculate the power it dissipates (using Ohm's Law). For resistor B, we know it has a voltage drop of 12v and a current of 0.5021a. We have enough information to calculate the power it dissipates (using Ohm's Law). Now just add the two power dissipation values to obtain the total power dissipated in the circuit.
Answered by Horatio - Wed Feb 18 10:20:45 2009
Q. Two resistors are connected in parallel across an ideal 12.0 V battery. Resistor A has a value of 22 ohm and resistor B carries a current of 0.5021 A. What is the total power dissipated in the circuit?
Asked by physics help - Tue Feb 17 10:03:15 2009 - - 2 Answers - 0 Comments
A. Peter H posted a good and correct solution. Below is another solution without needing the total current. Because both resistors are in parallel across the battery, then the entire battery voltage appears across each resistor. For resistor A, we know it has a voltage drop of 12v and a resistance of 22 . We have enough information to calculate the power it dissipates (using Ohm's Law). For resistor B, we know it has a voltage drop of 12v and a current of 0.5021a. We have enough information to calculate the power it dissipates (using Ohm's Law). Now just add the two power dissipation values to obtain the total power dissipated in the circuit.
Answered by Horatio - Wed Feb 18 10:20:45 2009
what is the total floor area of the demolished terminal 1 subang airport?
Q. does anyone know the total floor area of the old and demolished terminal 1 subang airport? and it is better if anyone have other technical information about the terminal 1 subang airport...
Asked by Hoydenly I - Thu Jul 24 23:41:20 2008 - - 1 Answers - 0 Comments
A. You could approximate it from Google map and a known object near by (car or bus for example.)
Answered by straight shooter - Sun Jul 27 19:48:06 2008
Q. does anyone know the total floor area of the old and demolished terminal 1 subang airport? and it is better if anyone have other technical information about the terminal 1 subang airport...
Asked by Hoydenly I - Thu Jul 24 23:41:20 2008 - - 1 Answers - 0 Comments
A. You could approximate it from Google map and a known object near by (car or bus for example.)
Answered by straight shooter - Sun Jul 27 19:48:06 2008
What is the total magnification of an object under a microscope on medium power?
Q. Whole Question: What is the total magnification of an object placed under a microscope on medium power if the medium power objective lens has a magnification of 5X and the ocular lens has a magnification of 40X? - I have a Science Grade 9 exam tomorrow (June 19, 2009) and I could really need some help on this question. Thank you.
Asked by Chris.Brophy - Thu Jun 18 11:27:26 2009 - - 1 Answers - 0 Comments
A. Just multiply the powers of the lenses, 5x40.
Answered by oikos - Thu Jun 18 11:35:09 2009
Q. Whole Question: What is the total magnification of an object placed under a microscope on medium power if the medium power objective lens has a magnification of 5X and the ocular lens has a magnification of 40X? - I have a Science Grade 9 exam tomorrow (June 19, 2009) and I could really need some help on this question. Thank you.
Asked by Chris.Brophy - Thu Jun 18 11:27:26 2009 - - 1 Answers - 0 Comments
A. Just multiply the powers of the lenses, 5x40.
Answered by oikos - Thu Jun 18 11:35:09 2009
What is the total cost to be debited to the investment account?
Q. on June 1, $500,000 of bonds were purchased as a long-term investment at 101 and $600 was paid as the brokerage commission. If the bonds bear interest a 11%, which is paid semiannually on January 1 and July 1. what is the total cost to be debited to the investment account?
Asked by Jaylee - Tue May 6 22:00:20 2008 - - 2 Answers - 0 Comments
A. You debit the cost of the bond itself based on the purchase price plus commission the interest is carried as an asset of prepaid interest. when you get your interest check, you credit your prepaid interest and the remainder is taken as credit to "interest income" You will have to pro rate the bond at the end of the year by computing your premium over the life of the bond.
Answered by A nobody - Wed May 7 11:38:41 2008
Q. on June 1, $500,000 of bonds were purchased as a long-term investment at 101 and $600 was paid as the brokerage commission. If the bonds bear interest a 11%, which is paid semiannually on January 1 and July 1. what is the total cost to be debited to the investment account?
Asked by Jaylee - Tue May 6 22:00:20 2008 - - 2 Answers - 0 Comments
A. You debit the cost of the bond itself based on the purchase price plus commission the interest is carried as an asset of prepaid interest. when you get your interest check, you credit your prepaid interest and the remainder is taken as credit to "interest income" You will have to pro rate the bond at the end of the year by computing your premium over the life of the bond.
Answered by A nobody - Wed May 7 11:38:41 2008
What is the total amount of combinations of a 10 digit phone number?
Q. My friend thinks that there are more people with mobile phones than the total amount of combinations, but i think he's wrong.
Asked by Idyllic - Fri Jul 13 16:47:04 2007 - - 5 Answers - 0 Comments
A. 10 to the 10th power. That's quite a bit.
Answered by alwaysmoose - Fri Jul 13 16:49:54 2007
Q. My friend thinks that there are more people with mobile phones than the total amount of combinations, but i think he's wrong.
Asked by Idyllic - Fri Jul 13 16:47:04 2007 - - 5 Answers - 0 Comments
A. 10 to the 10th power. That's quite a bit.
Answered by alwaysmoose - Fri Jul 13 16:49:54 2007
What is the total death toll caused by every war in history?
Q. 'Every war' includes large scale violent conflicts, terrorist attacks, and every recorded war in human history. 'Total death' does not include animals or extraterrestrials; specifically human deaths only.
Asked by Preston - Fri Dec 5 11:38:45 2008 - - 3 Answers - 0 Comments
A. Depending on what types of deaths etc you include in your calculations: World War I - 19,000,000 to 59,000,000 World War II - 40,000,000 to 72,000,000 Russian Civil War - 5,000,000 to 9,000,000 Vietnam War - 2,495,000 to 5,020,000 Afghan Civil War - 1,500,000 to 2,000,000 Korean War - 2,500,000 to 3,500,000 Napoleonic Wars - 3,500,000 to 16,000,000 Second Congo War - 3,800,000 to 13,800,000 You can see that the minimum and maximum estimates are wide appart - find the rest on the link below:
Answered by Persistent Lunatic - Fri Dec 5 13:04:27 2008
Q. 'Every war' includes large scale violent conflicts, terrorist attacks, and every recorded war in human history. 'Total death' does not include animals or extraterrestrials; specifically human deaths only.
Asked by Preston - Fri Dec 5 11:38:45 2008 - - 3 Answers - 0 Comments
A. Depending on what types of deaths etc you include in your calculations: World War I - 19,000,000 to 59,000,000 World War II - 40,000,000 to 72,000,000 Russian Civil War - 5,000,000 to 9,000,000 Vietnam War - 2,495,000 to 5,020,000 Afghan Civil War - 1,500,000 to 2,000,000 Korean War - 2,500,000 to 3,500,000 Napoleonic Wars - 3,500,000 to 16,000,000 Second Congo War - 3,800,000 to 13,800,000 You can see that the minimum and maximum estimates are wide appart - find the rest on the link below:
Answered by Persistent Lunatic - Fri Dec 5 13:04:27 2008
From Yahoo Answer Search: 'total'
Mon Mar 8 22:03:10 2010 [ refresh local cache ]
[Hide]▼
news.google.com
Seeking Alpha (blog)
Total restructuring charges are still expected to be around $135 to $140 million of which 60% to 70% should be non-cash. To date we have incurred $125 ...
and more »
crossfireforum.org
480px x 640px | 85.20kB
[source page]
Chrysler Crossfire eBay Motors item 110412868400 end time Jul 16 09 11 14 01 PDT
flickr.com
(Shanghaiist.com)
Fri, 05 Mar 2010 19:54:45 GM
24 Mar-26 Mar 2010 Halifax, NS *. Total. Building Commissioning Process (1.8 CEUs)* www.gic-edu.com/coursedetail.aspx?id=378 Description . Total. building commissioning, a tool originally developed for HVAC systems, is being extended to all ...
[Hide]▲
